mirror of
https://github.com/Slava-Shchipunov/awg-openwrt.git
synced 2026-03-14 01:13:09 +00:00
Feat/add install script (#31)
* feat: add awg install script * fix: replace curl with wget * fix: add opkg update run * feat: add firewall settings * fix: fix allowed_ips set * fix: add timeout * fix: fix peer create * docs: update readme
This commit is contained in:
Slava-Shchipunov
GitHub
207
amneziawg-install.sh
Normal file
207
amneziawg-install.sh
Normal file
@@ -0,0 +1,207 @@
|
||||
#!/bin/sh
|
||||
|
||||
#set -x
|
||||
|
||||
#Репозиторий OpenWRT должен быть доступен для установки зависимостей пакета kmod-amneziawg
|
||||
check_repo() {
|
||||
printf "\033[32;1mChecking OpenWrt repo availability...\033[0m\n"
|
||||
opkg update | grep -q "Failed to download" && printf "\033[32;1mopkg failed. Check internet or date. Command for force ntp sync: ntpd -p ptbtime1.ptb.de\033[0m\n" && exit 1
|
||||
}
|
||||
|
||||
install_awg_packages() {
|
||||
# Получение pkgarch с наибольшим приоритетом
|
||||
PKGARCH=$(opkg print-architecture | awk 'BEGIN {max=0} {if ($3 > max) {max = $3; arch = $2}} END {print arch}')
|
||||
|
||||
TARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 1)
|
||||
SUBTARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 2)
|
||||
VERSION=$(ubus call system board | jsonfilter -e '@.release.version')
|
||||
PKGPOSTFIX="_v${VERSION}_${PKGARCH}_${TARGET}_${SUBTARGET}.ipk"
|
||||
BASE_URL="https://github.com/Slava-Shchipunov/awg-openwrt/releases/download/"
|
||||
|
||||
AWG_DIR="/tmp/amneziawg"
|
||||
mkdir -p "$AWG_DIR"
|
||||
|
||||
if opkg list-installed | grep -q kmod-amneziawg; then
|
||||
echo "kmod-amneziawg already installed"
|
||||
else
|
||||
KMOD_AMNEZIAWG_FILENAME="kmod-amneziawg${PKGPOSTFIX}"
|
||||
DOWNLOAD_URL="${BASE_URL}v${VERSION}/${KMOD_AMNEZIAWG_FILENAME}"
|
||||
wget -O "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL"
|
||||
|
||||
if [ $? -eq 0 ]; then
|
||||
echo "kmod-amneziawg file downloaded successfully"
|
||||
else
|
||||
echo "Error downloading kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
opkg install "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME"
|
||||
|
||||
if [ $? -eq 0 ]; then
|
||||
echo "kmod-amneziawg file downloaded successfully"
|
||||
else
|
||||
echo "Error installing kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again"
|
||||
exit 1
|
||||
fi
|
||||
fi
|
||||
|
||||
if opkg list-installed | grep -q amneziawg-tools; then
|
||||
echo "amneziawg-tools already installed"
|
||||
else
|
||||
AMNEZIAWG_TOOLS_FILENAME="amneziawg-tools${PKGPOSTFIX}"
|
||||
DOWNLOAD_URL="${BASE_URL}v${VERSION}/${AMNEZIAWG_TOOLS_FILENAME}"
|
||||
wget -O "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME" "$DOWNLOAD_URL"
|
||||
|
||||
if [ $? -eq 0 ]; then
|
||||
echo "amneziawg-tools file downloaded successfully"
|
||||
else
|
||||
echo "Error downloading amneziawg-tools. Please, install amneziawg-tools manually and run the script again"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
opkg install "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME"
|
||||
|
||||
if [ $? -eq 0 ]; then
|
||||
echo "amneziawg-tools file downloaded successfully"
|
||||
else
|
||||
echo "Error installing amneziawg-tools. Please, install amneziawg-tools manually and run the script again"
|
||||
exit 1
|
||||
fi
|
||||
fi
|
||||
|
||||
if opkg list-installed | grep -q luci-app-amneziawg; then
|
||||
echo "luci-app-amneziawg already installed"
|
||||
else
|
||||
LUCI_APP_AMNEZIAWG_FILENAME="luci-app-amneziawg${PKGPOSTFIX}"
|
||||
DOWNLOAD_URL="${BASE_URL}v${VERSION}/${LUCI_APP_AMNEZIAWG_FILENAME}"
|
||||
wget -O "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL"
|
||||
|
||||
if [ $? -eq 0 ]; then
|
||||
echo "luci-app-amneziawg file downloaded successfully"
|
||||
else
|
||||
echo "Error downloading luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
opkg install "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME"
|
||||
|
||||
if [ $? -eq 0 ]; then
|
||||
echo "luci-app-amneziawg file downloaded successfully"
|
||||
else
|
||||
echo "Error installing luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again"
|
||||
exit 1
|
||||
fi
|
||||
fi
|
||||
|
||||
rm -rf "$AWG_DIR"
|
||||
}
|
||||
|
||||
configure_amneziawg_interface() {
|
||||
INTERFACE_NAME="awg1"
|
||||
CONFIG_NAME="amneziawg_awg1"
|
||||
PROTO="amneziawg"
|
||||
ZONE_NAME="awg1"
|
||||
|
||||
read -r -p "Enter the private key (from [Interface]):"$'\n' AWG_PRIVATE_KEY_INT
|
||||
|
||||
while true; do
|
||||
read -r -p "Enter internal IP address with subnet, example 192.168.100.5/24 (from [Interface]):"$'\n' AWG_IP
|
||||
if echo "$AWG_IP" | egrep -oq '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]+$'; then
|
||||
break
|
||||
else
|
||||
echo "This IP is not valid. Please repeat"
|
||||
fi
|
||||
done
|
||||
|
||||
read -r -p "Enter the public key (from [Peer]):"$'\n' AWG_PUBLIC_KEY_INT
|
||||
read -r -p "If use PresharedKey, Enter this (from [Peer]). If your don't use leave blank:"$'\n' AWG_PRESHARED_KEY_INT
|
||||
read -r -p "Enter Endpoint host without port (Domain or IP) (from [Peer]):"$'\n' AWG_ENDPOINT_INT
|
||||
|
||||
read -r -p "Enter Endpoint host port (from [Peer]) [51820]:"$'\n' AWG_ENDPOINT_PORT_INT
|
||||
AWG_ENDPOINT_PORT_INT=${AWG_ENDPOINT_PORT_INT:-51820}
|
||||
if [ "$AWG_ENDPOINT_PORT_INT" = '51820' ]; then
|
||||
echo $AWG_ENDPOINT_PORT_INT
|
||||
fi
|
||||
|
||||
read -r -p "Enter Jc value (from [Interface]):"$'\n' AWG_JC
|
||||
read -r -p "Enter Jmin value (from [Interface]):"$'\n' AWG_JMIN
|
||||
read -r -p "Enter Jmax value (from [Interface]):"$'\n' AWG_JMAX
|
||||
read -r -p "Enter S1 value (from [Interface]):"$'\n' AWG_S1
|
||||
read -r -p "Enter S2 value (from [Interface]):"$'\n' AWG_S2
|
||||
read -r -p "Enter H1 value (from [Interface]):"$'\n' AWG_H1
|
||||
read -r -p "Enter H2 value (from [Interface]):"$'\n' AWG_H2
|
||||
read -r -p "Enter H3 value (from [Interface]):"$'\n' AWG_H3
|
||||
read -r -p "Enter H4 value (from [Interface]):"$'\n' AWG_H4
|
||||
|
||||
uci set network.${INTERFACE_NAME}=interface
|
||||
uci set network.${INTERFACE_NAME}.proto=$PROTO
|
||||
uci set network.${INTERFACE_NAME}.private_key=$AWG_PRIVATE_KEY_INT
|
||||
uci set network.${INTERFACE_NAME}.listen_port='51821'
|
||||
uci set network.${INTERFACE_NAME}.addresses=$AWG_IP
|
||||
|
||||
uci set network.${INTERFACE_NAME}.awg_jc=$AWG_JC
|
||||
uci set network.${INTERFACE_NAME}.awg_jmin=$AWG_JMIN
|
||||
uci set network.${INTERFACE_NAME}.awg_jmax=$AWG_JMAX
|
||||
uci set network.${INTERFACE_NAME}.awg_s1=$AWG_S1
|
||||
uci set network.${INTERFACE_NAME}.awg_s2=$AWG_S2
|
||||
uci set network.${INTERFACE_NAME}.awg_h1=$AWG_H1
|
||||
uci set network.${INTERFACE_NAME}.awg_h2=$AWG_H2
|
||||
uci set network.${INTERFACE_NAME}.awg_h3=$AWG_H3
|
||||
uci set network.${INTERFACE_NAME}.awg_h4=$AWG_H4
|
||||
|
||||
if ! uci show network | grep -q ${CONFIG_NAME}; then
|
||||
uci add network ${CONFIG_NAME}
|
||||
fi
|
||||
|
||||
uci set network.@${CONFIG_NAME}[0]=$CONFIG_NAME
|
||||
uci set network.@${CONFIG_NAME}[0].name="${INTERFACE_NAME}_client"
|
||||
uci set network.@${CONFIG_NAME}[0].public_key=$AWG_PUBLIC_KEY_INT
|
||||
uci set network.@${CONFIG_NAME}[0].preshared_key=$AWG_PRESHARED_KEY_INT
|
||||
uci set network.@${CONFIG_NAME}[0].route_allowed_ips='1'
|
||||
uci set network.@${CONFIG_NAME}[0].persistent_keepalive='25'
|
||||
uci set network.@${CONFIG_NAME}[0].endpoint_host=$AWG_ENDPOINT_INT
|
||||
uci set network.@${CONFIG_NAME}[0].allowed_ips='0.0.0.0/0'
|
||||
uci add_list network.@${CONFIG_NAME}[0].allowed_ips='::/0'
|
||||
uci set network.@${CONFIG_NAME}[0].endpoint_port=$AWG_ENDPOINT_PORT_INT
|
||||
uci commit network
|
||||
|
||||
if ! uci show firewall | grep -q "@zone.*name='${ZONE_NAME}'"; then
|
||||
printf "\033[32;1mZone Create\033[0m\n"
|
||||
uci add firewall zone
|
||||
uci set firewall.@zone[-1].name=$ZONE_NAME
|
||||
uci set firewall.@zone[-1].network=$INTERFACE_NAME
|
||||
uci set firewall.@zone[-1].forward='REJECT'
|
||||
uci set firewall.@zone[-1].output='ACCEPT'
|
||||
uci set firewall.@zone[-1].input='REJECT'
|
||||
uci set firewall.@zone[-1].masq='1'
|
||||
uci set firewall.@zone[-1].mtu_fix='1'
|
||||
uci set firewall.@zone[-1].family='ipv4'
|
||||
uci commit firewall
|
||||
fi
|
||||
|
||||
if ! uci show firewall | grep -q "@forwarding.*name='${ZONE_NAME}'"; then
|
||||
printf "\033[32;1mConfigured forwarding\033[0m\n"
|
||||
uci add firewall forwarding
|
||||
uci set firewall.@forwarding[-1]=forwarding
|
||||
uci set firewall.@forwarding[-1].name="${ZONE_NAME}-lan"
|
||||
uci set firewall.@forwarding[-1].dest=${ZONE_NAME}
|
||||
uci set firewall.@forwarding[-1].src='lan'
|
||||
uci set firewall.@forwarding[-1].family='ipv4'
|
||||
uci commit firewall
|
||||
fi
|
||||
}
|
||||
|
||||
check_repo
|
||||
|
||||
install_awg_packages
|
||||
|
||||
printf "\033[32;1mDo you want to configure the amneziawg interface? (y/n): \033[0m\n"
|
||||
read IS_SHOULD_CONFIGURE_AWG_INTERFACE
|
||||
|
||||
if [ "$IS_SHOULD_CONFIGURE_AWG_INTERFACE" = "y" ] || [ "$IS_SHOULD_CONFIGURE_AWG_INTERFACE" = "Y" ]; then
|
||||
configure_amneziawg_interface
|
||||
else
|
||||
printf "\033[32;1mSkipping amneziawg interface configuration.\033[0m\n"
|
||||
fi
|
||||
|
||||
service network restart
|
||||
Reference in New Issue
Block a user